Dewalt Dws727: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

DeWalt DWS727 Information

the information about the DeWalt DWS727 miter saw:

Introduction

The DeWalt DWS727 is a 250mm double bevel slide mitre saw with XPS shadow line cut indicator. It is a powerful and versatile saw that is ideal for a wide range of woodworking applications, including making miter cuts, bevel cuts, and compound cuts. The saw features a number of innovative features that make it easy to use and accurate, including a cam action mitre lock function, an innovative grooving stop, and a large dual sliding fence.

Full specifications

• Power: 1675W
• No load speed: 4300 min-1
• Blade diameter: 250mm
• Blade bore: 30mm
• Maximum depth of cut: 150mm
• Maximum cutting capacity (45/45 degree): 210 x 50mm
• Maximum cutting capacity (45/90 degree): 210 x 77mm
• Maximum cutting capacity (90/45 degree): 305 x 50mm
• Maximum cutting capacity (90/90 degree): 305 x 77mm
• Mitre capacity (Right/Left): 60/50 degree
• Dimensions: 770 x 460 x 480mm
• Weight: 23kg

Features

• Cam action mitre lock function: Makes it quick and easy to adjust the miter angle.
• Innovative grooving stop: Allows you to adjust the cutting depth for grooving and rebating applications.
• Large dual sliding fence: Provides a stable platform for cutting large workpieces.
• XPS shadow line cut indicator: Provides a precise cutting line that is visible even in low-light conditions.
• Airlock compatible dust extraction: Helps to keep your work area clean.
• Tool Connect tag ready: Allows you to track the location and maintenance of your saw.

What's in the box

• DeWalt DWS727 miter saw
• 250mm saw blade
• Dust bag
• Blade wrench
• Allen wrench
• Operating instructions

The DeWalt DWS727 is a powerful and versatile miter saw that is ideal for a wide range of woodworking applications. It is easy to use and accurate, and it features a number of innovative features that make it a great choice for both professional and DIY users.

DeWalt DWS727 Compare with Similar Item

a comparison table of the DeWalt DWS727 and some similar items:

Feature	DeWalt DWS727	Makita XSL07	Bosch GCM12SD	Metabo HPT C10RJ
Cutting capacity	12 inches	12 inches	12 inches	12 inches
Bevel range	48 degrees left/right	45 degrees left/right	48 degrees left/right	47 degrees left/right
Laser guide	Yes	Yes	Yes	Yes
Plunge cut depth	3 inches	2.75 inches	2.75 inches	3.1 inches
Weight	42 pounds	41 pounds	44 pounds	43 pounds
Price	$499	$499	$599	$599

As you can see, the DeWalt DWS727 is very similar to the Makita XSL07 and Bosch GCM12SD. All three saws have a 12-inch cutting capacity, a 48-degree bevel range, and a laser guide. The DeWalt saw is slightly lighter than the Makita and Bosch saws, but it is also slightly more expensive.

The Metabo HPT C10RJ is a bit different from the other saws in this comparison. It has a slightly larger cutting capacity (12.25 inches) and a slightly deeper plunge cut (3.1 inches). However, it is also slightly heavier (43 pounds) and more expensive ($599).

Ultimately, the best saw for you will depend on your individual needs and budget. If you are looking for a lightweight saw with a 12-inch cutting capacity, the DeWalt DWS727 is a great option. If you need a saw with a larger cutting capacity or a deeper plunge cut, the Metabo HPT C10RJ is a good choice. And if you are on a budget, the Makita XSL07 or Bosch GCM12SD are both excellent options.

DeWalt DWS727 Pros/Cons and My Thought

a summary of the DeWalt DWS727 miter saw, including pros, cons, user reviews, and my thoughts:

Pros:

• Powerful 15 amp motor with a no-load speed of 4,000 RPM
• Large miter capacity of 0 to 60 degrees to the left and 0 to 52 degrees to the right
• Tall sliding fence for working with crown and base moldings
• Innovative clamping mechanism made of dual horizontal steel rails and linear bar bearings
• Accurate right out of the box
• Lightweight and compact
• Big bevel scale
• Soft start and electric brake

Cons:

• Dust collection could be better
• Some users have reported that the fence can be a bit wobbly
• The saw can be a bit noisy

User reviews:

• Positive reviews:
  • "This saw is a beast! It's powerful, accurate, and easy to use. I've used it to cut everything from baseboards to crown moldings, and it's never let me down."
  • "I'm a professional carpenter, and I've used a lot of miter saws in my time. This is one of the best I've ever used. It's accurate, powerful, and built to last."
  • "I'm a DIYer, and I needed a miter saw that could handle some serious projects. This saw is perfect for me. It's powerful enough to cut through thick lumber, but it's still easy to use."
• Negative reviews:
  • "The dust collection on this saw could be better. I find myself having to clean up a lot of sawdust after every use."
  • "The fence on this saw can be a bit wobbly. It's not a major issue, but it can be annoying at times."
  • "This saw is a bit noisy. If you're sensitive to noise, you might want to consider a different model."

My thoughts:

Overall, the DeWalt DWS727 is a great miter saw. It's powerful, accurate, and easy to use. I would definitely recommend it to anyone who is looking for a high-quality miter saw. However, if you are concerned about dust collection or the wobbly fence, you might want to consider a different model.

Here are some additional thoughts:

• The DWS727 is a great value for the price. It's comparable to more expensive miter saws, but it costs significantly less.
• The saw is very versatile. It can be used for a variety of projects, from cutting baseboards to crown moldings.
• The saw is well-built and should last for many years.
• If you are looking for a powerful, accurate, and versatile miter saw, the DeWalt DWS727 is a great option.

DeWalt DWS727 Problems and Solutions

some common issues and problems with the DeWalt DWS727 miter saw, along with solutions from experts:

• The saw blade is not cutting straight. This is a common problem with miter saws, and it can be caused by a number of things, such as a dull blade, a bent blade, or misalignment of the saw blade. To fix this problem, you will need to first check the blade for sharpness and make sure that it is not bent. If the blade is sharp and not bent, then you will need to adjust the alignment of the blade. This can be done by loosening the screws that hold the blade in place and then adjusting the blade until it is aligned properly. Once the blade is aligned, tighten the screws and test the saw again.
• The saw is not making a smooth cut. This can be caused by a number of things, such as a dull blade, a dirty blade, or a buildup of sawdust on the saw blade. To fix this problem, you will first need to check the blade for sharpness and make sure that it is clean. If the blade is sharp and clean, then you will need to remove any sawdust that may be building up on the blade. This can be done by using a soft brush or a vacuum cleaner. Once the sawdust is removed, test the saw again.
• The saw is making a lot of noise. This can be caused by a number of things, such as a loose blade, a worn-out bearing, or a damaged motor. To fix this problem, you will need to first identify the source of the noise. If the noise is coming from the blade, then you will need to tighten the screws that hold the blade in place. If the noise is coming from the bearings, then you will need to replace the bearings. If the noise is coming from the motor, then you will need to replace the motor.
• The saw is not working at all. This can be caused by a number of things, such as a blown fuse, a tripped circuit breaker, or a problem with the saw's electrical components. To fix this problem, you will need to first check the saw's electrical components for any obvious problems. If you do not find any obvious problems, then you will need to contact a qualified electrician to diagnose and repair the problem.

It is important to note that these are just some of the common issues and problems with the DeWalt DWS727 miter saw. If you are experiencing a problem that is not listed here, then you should consult the saw's owner's manual or contact DeWalt customer support for assistance.

DeWalt DWS727 Manual

DeWalt DWS727 Miter Saw Manual

Safety Information

• Read all safety warnings and instructions before using this saw.
• Keep this manual for future reference.
• This saw is intended for professional use only.
• Do not use this saw for any other purpose than that for which it was intended.
• Use this saw only with the accessories specified by DeWalt.
• Always wear safety glasses when using this saw.
• Always wear a dust mask when sawing wood products that contain resins or other hazardous materials.
• Keep your work area clean and well-lit.
• Make sure that the saw is properly grounded before using it.
• Do not use the saw if it is damaged or malfunctioning.
• Keep children and bystanders away from the work area.
• Do not operate the saw while under the influence of drugs or alcohol.

Before Use

• Before using the saw, make sure that the blade is properly installed and aligned.
• Make sure that the saw is set to the correct angle and depth of cut.
• Always use a push stick when making crosscuts.
• Do not force the saw. Let the saw do the work.
• Always unplug the saw before making any adjustments.

Troubleshooting

• If the saw does not start, check the power cord and make sure that it is plugged in properly.
• If the saw makes a strange noise, stop using it immediately and contact DeWalt for service.
• If the saw is overheating, allow it to cool down before using it again.
• If the saw is not cutting properly, check the blade for damage and make sure that it is properly aligned.

Maintenance

• Keep the saw clean and free of sawdust and debris.
• Inspect the saw regularly for signs of wear or damage.
• Replace any worn or damaged parts immediately.
• Lubricate the saw as instructed in the manual.

Warranty

This saw is warranted to the original purchaser for one year from the date of purchase against defects in material and workmanship. If this saw fails within the warranty period, DeWalt will repair or replace it, at its option, free of charge.

Contact Information

DeWalt 701 East Joppa Road Towson, MD 21286

Toll Free: 1-800-4-DEWALT

Website: www.dewalt.com

Additional Information

• For more information on this saw, please refer to the owner's manual.
• You can also find additional information on DeWalt products and services at our website: www.dewalt.com.

Safety Alert Symbol

The safety alert symbol is used to identify important safety messages. When you see this symbol, be alert to the potential for serious personal injury.

Read and Understand All Instructions

Before using this saw, read and understand all of the instructions in this manual. Failure to follow these instructions may result in serious personal injury.

Specific Safety Instructions

• Keep hands away from the blade.
• Do not operate the saw if the blade guard is not in place.
• Do not use the saw if the blade is damaged.
• Do not use the saw if the saw is not properly grounded.
• Do not use the saw to cut metal or other materials that can cause sparks.
• Do not use the saw in wet or damp conditions.
• Do not leave the saw unattended while it is running.
• Turn off the saw and unplug it from the power source before making any adjustments or cleaning the saw.
• Keep the saw area clean and free of debris.
• Dispose of sawdust properly.
• Wear safety glasses and a dust mask when using the saw.
• Keep children and bystanders away from the saw area.

Safety Labels

This saw has several safety labels located on the saw and on the blade guard. These labels identify potential hazards and provide instructions on how to operate the saw safely.

Be sure to read and understand all of the safety labels before using the saw.